EDC LED Lantern Outdoor Camping Flashlights UV RGB Light USB-C Rechargeable Lamp 2Pcs 10280 Li-on Magnetic Tail Torch GTNANO V6

Operation Instructions

General Modes: Low, Medium, High (with mode memory)

Hidden Modes: Turbo, Strobe, SOS, Beacon

Side light: White High, White Low, Red-blue blink, Red, Red blink, Green, Green blink, Blue, Blue blink, UV.

1.0N/OFF: Click the switch once.

2.Output change: From ON, press and hold the switch will ramp the output levels (Low, Medium, High), release the switch to select the desired level.

3.Turbo: Two quick clicks of the switch from the general mode.

4.Blinks: Triple-click the switch to enter Strobe mode. Another triple-click will change the blinking modes(SOS, Beacon, Strobe).

5.Side Light:Two clicks of the switch from off to enter the side white High mode, one click to change the side light modes, two clicks to turn the lamp off.

6.UV: Press and hold the switch from OFF.

7.Lock-out/Unlock: Quadruple-click the switch from OFF. In lock-out mode, momentary ON is available by pressing the switch.

8.Switch Backlight ON/OFF: Click the switch seven times from OFF to toggle the backlight.

Mode Memory Function

Under the general mode, the flashlight will remember and recall the last used output level when turning on again.

USB-C Charging

1.Rechargeable via a built-in USB-C charging port.

2.Built-in overcharge protection to prevent overcharging.

3.The indicator light is green when the voltage is sufficient and turns red when the battery is low.

4.The charging indicator is red during charging and turns green once fully charged.

5.After charging is completed, remember to replace the rubber cover to maintain the waterproof capability.

Multiple Protection Functions

1.Overcharge Protection to prevent damage to the battery from overcharging.

2.Over-Discharge Protection to prevent damage to the battery from over-discharge.

3.Reverse Polarity Protection to prevent damage to the flashlight from incorrect battery installation or short circuit.

4.Overheat Protection: When the flashlight's temperature is high, it will automatically reduce the output to prevent overheating and ensure comfortable use.

5.Low Voltage Protection: When the voltage drops, the flashlight will reduce the output and eventually shut down automatically.